UM-50ACNC - 2-ROLL CNC THREAD ROLLING MACHINE
*Both shafts are driven by servo motors which are able to change rolling direction and speed during thread rolling progress.
*The feeding of right roller is driven by servo motor, the feeding and stay time can be divided for several stages. It is good for extend the roller life and prevent the deform of work piece.
*The conversational program is easier to operate, adjustment, and input the thread roll data.
*CNC thread rolling machines are the choice for larger pitches & deeper depth work pieces.
*The machine bases are FC-25 casting steel.
| UM-50A CNC Type thread rolling machine | ||
| work piece diameter (㎜) | ⌀6 - ⌀50 | |
| Axial pitch for ISO threads(㎜) | 1.0P- 10.0P (M0.5 - M3.0) | |
| Length of thread rolling (㎜) | In feed (Plunge) : 148㎜ | |
| Thru feed: no limited | ||
| Spindle speed | 1 - 80 r.p.m (Servo motor) | |
| thread rollingd die | Diameter | ⌀200 |
| Bore | ⌀70 | |
| length | 35, 70, 100, 150 | |
| Keyway | 14×7 | |
| Distance of thread rolling spindles (㎜) | 190-250mm | |
| output <pcs/min> | 1 ~ 12 | |
| swivelling angle | ± 4° | |
| Servo Motor | 7.5 kW × 2 = 15 kW | |
| Feeding Servo Motor | 7.5 kW | |
| Feeding Power (right roller) | Ball screw (30 ton) | |
| net weight | 3250 kg | |
| Operation required space | 2000㎜ × 1850㎜ × 2405㎜ | |
| Component parts | ||
| Materials: | ||
| 1. Machine base: High tension case iron FC-25 ~ FC-30 frame | ||
| 2. Worm series：SNCM-21 tool steel with normalizing & carburizing progress | ||
| 3. Worm gears： Phosphor bronze | ||
| 4. Worm shafts：SNCM-21 tool steel with normalizing & carburizing progress. (Grinding threads) | ||
| 5. Feeding: C1 grade, grinding ball screw | ||
| 6. Center holder: Linear guideway, Air cylinder | ||
| Bearings: | ||
| 1. Ball bearings： NTN, NSK | ||
| 2. Roller bearings： NTN ，URB | ||
| 3. Needle bearings：IKO | ||
| 4. Ball screws : PMI [1R12020-F1-FSVH-377-602-0.025] | ||
| 5. Linear guideway: PMI [MSR45LE2SSF1-R625.5-24/24HIII] | ||
| Accessories: | ||
| 1. Y axial, Z axial (main shaft): 7.5 Kw servo motor*2 units [Syntec S08-AM48-20-F5] | ||
| 2. X axial (right roller feeding): 5.5 Kw servo motor * 1 unit[Syntec S08-AM35-20-F5] | ||
| 3. Controller: dialogue CNC Syntec [HC15E-S-15"_M3] | ||
| 4. X axial planetary gear reducer : Apex [AB180-050-S2-P2] | ||
